-
-
420J1M
420U6
High-End Cutlery Knives, Dishwasher Safe
Availability: | |
---|---|
| |
420U6 stainless steel is an improved martensitic stainless steel, a high hardness stainless steel in the 420 series specially used for knives. It has good corrosion resistance.
Standard | C≤% | Si≤% | Mn≤% | P≤% | S≤% | Cr | Ni≤% | N |
Q/TX086-2012 (TISCO Standard) | 0.13-0.25 | 1 | 1 | 0.04 | 0.03 | 13.00-14.50 | 0.6 | 0.06-0.15 |
Standard | T.S. min | Y.S. min | EL min% | HARDNESS( max) | BEND | |||
Mpa | Mpa | 50mm | HBW | HRB | HV | |||
Q/TX086-2012 (TISCO Standard) | 520 | 225 | 18 | 223 | 97 | 234 | ||
Precision stainless steel strip | ||||||||
Thickness | 0.08-1.2mm | |||||||
Rolling Width | 4.5-680mm | |||||||
Slitting width | 5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) | |||||||
Length | coil or as per requirement. | |||||||
Surface | 2B | |||||||
Original | DSM | |||||||
Standard | Produce as per your requirement. | |||||||
MOQ | 3mt or as per coil actual weight | |||||||
Hot rolled stainless steel sheet | ||||||||
Thickness | 3-10mm | |||||||
Width | 1250mm | |||||||
Length | coil or as per requirement. | |||||||
Surface | No.1 1D 1E | |||||||
Original | TISCO | |||||||
Standard | Q/TX086-2012 | |||||||
MOQ for sheet | 5 Pcs |
420U6 stainless steel is an improved martensitic stainless steel, a high hardness stainless steel in the 420 series specially used for knives. It has good corrosion resistance.
Standard | C≤% | Si≤% | Mn≤% | P≤% | S≤% | Cr | Ni≤% | N |
Q/TX086-2012 (TISCO Standard) | 0.13-0.25 | 1 | 1 | 0.04 | 0.03 | 13.00-14.50 | 0.6 | 0.06-0.15 |
Standard | T.S. min | Y.S. min | EL min% | HARDNESS( max) | BEND | |||
Mpa | Mpa | 50mm | HBW | HRB | HV | |||
Q/TX086-2012 (TISCO Standard) | 520 | 225 | 18 | 223 | 97 | 234 | ||
Precision stainless steel strip | ||||||||
Thickness | 0.08-1.2mm | |||||||
Rolling Width | 4.5-680mm | |||||||
Slitting width | 5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) | |||||||
Length | coil or as per requirement. | |||||||
Surface | 2B | |||||||
Original | DSM | |||||||
Standard | Produce as per your requirement. | |||||||
MOQ | 3mt or as per coil actual weight | |||||||
Hot rolled stainless steel sheet | ||||||||
Thickness | 3-10mm | |||||||
Width | 1250mm | |||||||
Length | coil or as per requirement. | |||||||
Surface | No.1 1D 1E | |||||||
Original | TISCO | |||||||
Standard | Q/TX086-2012 | |||||||
MOQ for sheet | 5 Pcs |