 |
430
The 430 Stainless Steel Oscillate Wound Strip is a magnetic, ferritic-grade solution ideal for applications where cost-efficiency and moderate corrosion resistance are key. Precision slit and tightly oscillated, this strip allows longer coil lengths with fewer changeovers, improving processing efficiency. With good formability, moderate strength, and resistance to oxidation, it is commonly used in appliance components, automotive trim, metal hoses, and general fabrication. Its magnetic properties also make it suitable for electrical and decorative applications where magnetism is a requirement. A practical choice for manufacturers seeking performance at a competitive price.
Chemical Composition
| C≤% | Si≤% | Mn≤% | P≤% | S≤% | Cr % |
| 0.12 | 1.00 | 1.00 | 0.040 | 0.030 | 16.00-18.00 |
Mechanical properties
| Standard | Tensile strength(Min) | Yield Strength(Min) | Elongation(Min)% | Hardness |
| Mpa | Mpa | ＜0.4mm | HRB(Max） | |
| ASTM A240 | 450 | 205 | 22 | 89 |
| JIS G 4305 | 450 | 205 | 22 | 88 |
| GB/T4237 | 450 | 205 | 22 | 89 |
Application Fields
Kitchen Appliances & Cookware
Automotive Applications
Architectural Applications
Food Processing and Equipment
Furnace Components
Supply size
Thickness: Min 0.2mm
Width: 8-25mm
Spool width: Max 350mm
Single weight: Max 600kgs
Inside diameter: 300-400mm
Outside diameter: Max 750mm
Surface
DSM offers a variety of different surface treatments for stainless steel plates. There are1U, 1C, 1D, 1E, 2B, BA, No.4, TR, HL etc.
The 430 Stainless Steel Oscillate Wound Strip is a magnetic, ferritic-grade solution ideal for applications where cost-efficiency and moderate corrosion resistance are key. Precision slit and tightly oscillated, this strip allows longer coil lengths with fewer changeovers, improving processing efficiency. With good formability, moderate strength, and resistance to oxidation, it is commonly used in appliance components, automotive trim, metal hoses, and general fabrication. Its magnetic properties also make it suitable for electrical and decorative applications where magnetism is a requirement. A practical choice for manufacturers seeking performance at a competitive price.
Chemical Composition
| C≤% | Si≤% | Mn≤% | P≤% | S≤% | Cr % |
| 0.12 | 1.00 | 1.00 | 0.040 | 0.030 | 16.00-18.00 |
Mechanical properties
| Standard | Tensile strength(Min) | Yield Strength(Min) | Elongation(Min)% | Hardness |
| Mpa | Mpa | ＜0.4mm | HRB(Max） | |
| ASTM A240 | 450 | 205 | 22 | 89 |
| JIS G 4305 | 450 | 205 | 22 | 88 |
| GB/T4237 | 450 | 205 | 22 | 89 |
Application Fields
Kitchen Appliances & Cookware
Automotive Applications
Architectural Applications
Food Processing and Equipment
Furnace Components
Supply size
Thickness: Min 0.2mm
Width: 8-25mm
Spool width: Max 350mm
Single weight: Max 600kgs
Inside diameter: 300-400mm
Outside diameter: Max 750mm
Surface
DSM offers a variety of different surface treatments for stainless steel plates. There are1U, 1C, 1D, 1E, 2B, BA, No.4, TR, HL etc.
