 |
|
| |
420J2 Stainless Steel Strips
DSM
1.4028
420
SUS420J2
30Cr13
Higher hardness than 20Cr13 after quenching, used for knife, blade, scissors, putty knife， wafer ring， HDD
| Cold rolled stainless steel coil & sheet | |
| Thickness | 0.6-3.0mm |
| Width | 1000mm,1219mm |
| Length | coil or as per requirement |
| Surface | 2B TR HT |
| Original | TISCO JISCO |
| Standard | GB/T3280-2007 JIS G4305 |
| MOQ for coil | 5mt or as per coil actual weight |
| MOQ for sheet | 5 Pcs |
| Hot rolled stainless steel coil & sheet | |
| Thickness | 2.5-6.0mm |
| Width | 1219mm |
| Length | coil or as per requirement |
| Surface | No.1,1D |
| Original | TISCO JISCO |
| Standard | GB/T4237-2015 JIS G4304 |
| MOQ for coil | 13mt or as per coil actual weight |
| MOQ for sheet | 5 Pcs |
| Re-rolling stainless steel coil & sheet | |
| Thickness | 0.6-3.0mm |
| Rolling width | 550-680mm |
| Slitting width | 25-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) |
| Length | as per requirement |
| Surface | 2B |
| Standard | Produce as per your requirement |
| MOQ for coil | 5mt or as per coil actual weight |
| MOQ for sheet | 5 Pcs |
| Precision stainless steel strip | |
| Thickness | 0.08-1.2mm |
| Rolling width | 450-680mm |
| Slitting width | 5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) |
| Length | coil or as per requirement |
| Surface | 2B |
| Original | DSM |
| Standard | Produce as per your requirement |
| MOQ | 3mt or as per coil actual weight |
| Tempering Temperature (°C) | Tensile Strength (MPa) | Yield Strength 0.2% (MPa) | Elongation (% A50) | Hardness Brinell (HB) |
|---|---|---|---|---|
| Annealed * | 655 | 345 | 25 | 241 max |
| 399°F (204°C) | 1600 | 1360 | 12 | 444 max |
| 600°F (316°C) | 1580 | 1365 | 14 | 444 max |
| 800°F (427°C) | 1620 | 1420 | 10 | 461 max |
| 1000°F (538°C) | 1305 | 1095 | 15 | 375 max |
| 1099°F (593°C) | 1035 | 810 | 18 | 302 max |
| 1202°F (650°C) | 895 | 680 | 20 | 262 max |
| * Annealed tensile properties are typical for Condition A of ASTM A276; annealed hardness is the specified maximum. | ||||
| C % | Mn % | Si % | P % | S % | Ni % | Cr % |
| 0.26 - 0.35 | 1.00 | 1.00 | 0.040 | 0.030 | (0.60) | 12.0 - 14.0 |
Cutlery and Kitchenware
Cutting Tools
Scissors and Surgical Instruments
Defense & Sporting Goods
General Industrial Use
Surface
DSM offers a variety of different surface treatments for stainless steel plates. There are1U, 1C, 1D, 1E, 2B, BA, No.4, TR, HL etc.
Label
The label on each pallet shows the relevant material information, including coil number, steel type, size, net weight, etc.; it is convenient for customers to count the goods.
| Cold rolled stainless steel coil & sheet | |
| Thickness | 0.6-3.0mm |
| Width | 1000mm,1219mm |
| Length | coil or as per requirement |
| Surface | 2B TR HT |
| Original | TISCO JISCO |
| Standard | GB/T3280-2007 JIS G4305 |
| MOQ for coil | 5mt or as per coil actual weight |
| MOQ for sheet | 5 Pcs |
| Hot rolled stainless steel coil & sheet | |
| Thickness | 2.5-6.0mm |
| Width | 1219mm |
| Length | coil or as per requirement |
| Surface | No.1,1D |
| Original | TISCO JISCO |
| Standard | GB/T4237-2015 JIS G4304 |
| MOQ for coil | 13mt or as per coil actual weight |
| MOQ for sheet | 5 Pcs |
| Re-rolling stainless steel coil & sheet | |
| Thickness | 0.6-3.0mm |
| Rolling width | 550-680mm |
| Slitting width | 25-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) |
| Length | as per requirement |
| Surface | 2B |
| Standard | Produce as per your requirement |
| MOQ for coil | 5mt or as per coil actual weight |
| MOQ for sheet | 5 Pcs |
| Precision stainless steel strip | |
| Thickness | 0.08-1.2mm |
| Rolling width | 450-680mm |
| Slitting width | 5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) |
| Length | coil or as per requirement |
| Surface | 2B |
| Original | DSM |
| Standard | Produce as per your requirement |
| MOQ | 3mt or as per coil actual weight |
| Tempering Temperature (°C) | Tensile Strength (MPa) | Yield Strength 0.2% (MPa) | Elongation (% A50) | Hardness Brinell (HB) |
|---|---|---|---|---|
| Annealed * | 655 | 345 | 25 | 241 max |
| 399°F (204°C) | 1600 | 1360 | 12 | 444 max |
| 600°F (316°C) | 1580 | 1365 | 14 | 444 max |
| 800°F (427°C) | 1620 | 1420 | 10 | 461 max |
| 1000°F (538°C) | 1305 | 1095 | 15 | 375 max |
| 1099°F (593°C) | 1035 | 810 | 18 | 302 max |
| 1202°F (650°C) | 895 | 680 | 20 | 262 max |
| * Annealed tensile properties are typical for Condition A of ASTM A276; annealed hardness is the specified maximum. | ||||
| C % | Mn % | Si % | P % | S % | Ni % | Cr % |
| 0.26 - 0.35 | 1.00 | 1.00 | 0.040 | 0.030 | (0.60) | 12.0 - 14.0 |
Cutlery and Kitchenware
Cutting Tools
Scissors and Surgical Instruments
Defense & Sporting Goods
General Industrial Use
Surface
DSM offers a variety of different surface treatments for stainless steel plates. There are1U, 1C, 1D, 1E, 2B, BA, No.4, TR, HL etc.
Label
The label on each pallet shows the relevant material information, including coil number, steel type, size, net weight, etc.; it is convenient for customers to count the goods.
