 |
|
| |
420U6
DSM
-
-
420J1M
420U6
High-End Cutlery Knives, Dishwasher Safe
420U6 is a nitrogen-containing martensitic stainless steel, which adds (700~1200)×10-6 nitrogen on the basis of SUS420J1, further improving the material hardness and pitting corrosion resistance. After reasonable process design and process optimization, the product was successfully supplied in batches in the cutting tool industry.
| Standard | C≤% | Si≤% | Mn≤% | P≤% | S≤% | Cr | Ni≤% | N |
Q/TX086-2012 (TISCO Standard) | 0.13-0.25 | 1 | 1 | 0.04 | 0.03 | 13.00-14.50 | 0.6 | 0.06-0.15 |
| Standard | T.S. min | Y.S. min | EL min% | HARDNESS( max) | BEND | |||
| Mpa | Mpa | 50mm | HBW | HRB | HV | |||
Q/TX086-2012 (TISCO Standard) | 520 | 225 | 18 | 223 | 97 | 234 | ||
| Precision stainless steel strip | ||||||||
| Thickness | 0.08-1.2mm | |||||||
| Rolling Width | 4.5-680mm | |||||||
| Slitting width | 5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) | |||||||
| Length | coil or as per requirement. | |||||||
| Surface | 2B | |||||||
| Original | DSM | |||||||
| Standard | Produce as per your requirement. | |||||||
| MOQ | 3mt or as per coil actual weight | |||||||
| Hot rolled stainless steel sheet | ||||||||
| Thickness | 3-10mm | |||||||
| Width | 1250mm | |||||||
| Length | coil or as per requirement. | |||||||
| Surface | No.1 1D 1E | |||||||
| Original | TISCO | |||||||
| Standard | Q/TX086-2012 | |||||||
| MOQ for sheet | 5 Pcs | |||||||
420U6 is a nitrogen-containing martensitic stainless steel, which adds (700~1200)×10-6 nitrogen on the basis of SUS420J1, further improving the material hardness and pitting corrosion resistance. After reasonable process design and process optimization, the product was successfully supplied in batches in the cutting tool industry.
| Standard | C≤% | Si≤% | Mn≤% | P≤% | S≤% | Cr | Ni≤% | N |
Q/TX086-2012 (TISCO Standard) | 0.13-0.25 | 1 | 1 | 0.04 | 0.03 | 13.00-14.50 | 0.6 | 0.06-0.15 |
| Standard | T.S. min | Y.S. min | EL min% | HARDNESS( max) | BEND | |||
| Mpa | Mpa | 50mm | HBW | HRB | HV | |||
Q/TX086-2012 (TISCO Standard) | 520 | 225 | 18 | 223 | 97 | 234 | ||
| Precision stainless steel strip | ||||||||
| Thickness | 0.08-1.2mm | |||||||
| Rolling Width | 4.5-680mm | |||||||
| Slitting width | 5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) | |||||||
| Length | coil or as per requirement. | |||||||
| Surface | 2B | |||||||
| Original | DSM | |||||||
| Standard | Produce as per your requirement. | |||||||
| MOQ | 3mt or as per coil actual weight | |||||||
| Hot rolled stainless steel sheet | ||||||||
| Thickness | 3-10mm | |||||||
| Width | 1250mm | |||||||
| Length | coil or as per requirement. | |||||||
| Surface | No.1 1D 1E | |||||||
| Original | TISCO | |||||||
| Standard | Q/TX086-2012 | |||||||
| MOQ for sheet | 5 Pcs | |||||||
