Availability: | |
---|---|
| |
1.4828
DSM
1.4828
-
-
X15CrNiSi20-12
Shipbuilding/Railways/Chemical plant
The material of 1.4828 is X15CrNiSi2012 German DIN standard heat-resistant steel. 1.4828 is the material number of this heat-resistant steel, and the grade is X15CrNiSi2012.
Heat-resistant steel is commonly used in the manufacture of boilers, steam turbines, power machinery, industrial furnaces and parts that operate at high temperatures in industrial sectors such as aviation and petrochemicals. In addition to high-temperature strength and resistance to high-temperature oxidative corrosion, these parts also require sufficient toughness, good processability and weldability, and a certain degree of structural stability depending on their uses.
Standard | C≤% | Si≤% | Mn≤% | P≤% | S≤% | Cr | Ni≤% | N≤% |
EN 10095-1999 | 0.2 | 1.50-2.50 | 2 | 0.045 | 0.015 | 19.00-21.00 | 11.00-13.00 | 0.11 |
Standard | T.S. min | Y.S. min | EL min% | HARDNESS( max) | BEND | |||
Mpa | Mpa | 50mm | HBW | HRB | HV | |||
EN 10095-1999 | 550-750 | ---- | ---- | 223 | ---- | ---- | ---- | |
Precision stainless steel strip | ||||||||
Thickness | 0.08-0.5mm | |||||||
Rolling width | 450-680mm | |||||||
Slitting width | 5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) | |||||||
Length | coil or as per requirement. | |||||||
Surface | 2B | |||||||
Original | DSM | |||||||
Standard | Produce as per your requirement. | |||||||
MOQ | 3mt or as per coil actual weight |
The material of 1.4828 is X15CrNiSi2012 German DIN standard heat-resistant steel. 1.4828 is the material number of this heat-resistant steel, and the grade is X15CrNiSi2012.
Heat-resistant steel is commonly used in the manufacture of boilers, steam turbines, power machinery, industrial furnaces and parts that operate at high temperatures in industrial sectors such as aviation and petrochemicals. In addition to high-temperature strength and resistance to high-temperature oxidative corrosion, these parts also require sufficient toughness, good processability and weldability, and a certain degree of structural stability depending on their uses.
Standard | C≤% | Si≤% | Mn≤% | P≤% | S≤% | Cr | Ni≤% | N≤% |
EN 10095-1999 | 0.2 | 1.50-2.50 | 2 | 0.045 | 0.015 | 19.00-21.00 | 11.00-13.00 | 0.11 |
Standard | T.S. min | Y.S. min | EL min% | HARDNESS( max) | BEND | |||
Mpa | Mpa | 50mm | HBW | HRB | HV | |||
EN 10095-1999 | 550-750 | ---- | ---- | 223 | ---- | ---- | ---- | |
Precision stainless steel strip | ||||||||
Thickness | 0.08-0.5mm | |||||||
Rolling width | 450-680mm | |||||||
Slitting width | 5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) | |||||||
Length | coil or as per requirement. | |||||||
Surface | 2B | |||||||
Original | DSM | |||||||
Standard | Produce as per your requirement. | |||||||
MOQ | 3mt or as per coil actual weight |