 |
|
| |
5Cr15Mov
DSM
1.4116
5Cr15Mov
blades of food industry and knives
50Cr15MoV is based on Cr13 stainless steel. The C content is increased to 0.5%, the Cr content is increased to 15%, and molybdenum and vanadium elements are added. After quenching, the hardness can reach HRC 56-60, and it has good corrosion resistance and wear resistance. sex, mainly used in high-end tool industry.
| Standard | C≤% | Si≤% | Mn≤% | P≤% | S≤% | Cr | Mo≤% | V |
| GB/T 3280-2015 | 0.45-0.55 | 1 | 1 | 0.04 | 0.015 | 14.00-15.00 | 0.50-0.80 | 0.10-0.20 |
| Standard | T.S. min | Y.S. min | EL min% | HARDNESS( max) | BEND | |||
| Mpa | Mpa | 50mm | HBW | HRB | HV | |||
| GB/T 3280-2015 | 850 | 12 | 280 | 100 | 280 | |||
| Re-rolling stainless steel coil & sheet | ||||||||
| Thickness | 0.7-3.0mm | |||||||
| Rolling Width | 550-680mm | |||||||
| Slitting width | 25-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) | |||||||
| Length | as per requirement | |||||||
| Surface | 2B | |||||||
| Standard | Produce as per your requirement. | |||||||
| MOQ for coil | 5mt or as per coil actual weight | |||||||
| MOQ for sheet | 5 Pcs | |||||||
| Precision stainless steel strip | ||||||||
| Thickness | 0.08-1.2mm | |||||||
| Rolling width | 450-680mm | |||||||
| Slitting width | 5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) | |||||||
| Length | coil or as per requirement. | |||||||
| Surface | 2B | |||||||
| Original | DSM | |||||||
| Standard | Produce as per your requirement. | |||||||
| MOQ | 3mt or as per coil actual weight | |||||||
50Cr15MoV is based on Cr13 stainless steel. The C content is increased to 0.5%, the Cr content is increased to 15%, and molybdenum and vanadium elements are added. After quenching, the hardness can reach HRC 56-60, and it has good corrosion resistance and wear resistance. sex, mainly used in high-end tool industry.
| Standard | C≤% | Si≤% | Mn≤% | P≤% | S≤% | Cr | Mo≤% | V |
| GB/T 3280-2015 | 0.45-0.55 | 1 | 1 | 0.04 | 0.015 | 14.00-15.00 | 0.50-0.80 | 0.10-0.20 |
| Standard | T.S. min | Y.S. min | EL min% | HARDNESS( max) | BEND | |||
| Mpa | Mpa | 50mm | HBW | HRB | HV | |||
| GB/T 3280-2015 | 850 | 12 | 280 | 100 | 280 | |||
| Re-rolling stainless steel coil & sheet | ||||||||
| Thickness | 0.7-3.0mm | |||||||
| Rolling Width | 550-680mm | |||||||
| Slitting width | 25-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) | |||||||
| Length | as per requirement | |||||||
| Surface | 2B | |||||||
| Standard | Produce as per your requirement. | |||||||
| MOQ for coil | 5mt or as per coil actual weight | |||||||
| MOQ for sheet | 5 Pcs | |||||||
| Precision stainless steel strip | ||||||||
| Thickness | 0.08-1.2mm | |||||||
| Rolling width | 450-680mm | |||||||
| Slitting width | 5-680mm(We can slitting for you as per your required width,but if you need some special width such as 400mm coil the remaining 280mm you also need to purchase which can not sale to other clients) | |||||||
| Length | coil or as per requirement. | |||||||
| Surface | 2B | |||||||
| Original | DSM | |||||||
| Standard | Produce as per your requirement. | |||||||
| MOQ | 3mt or as per coil actual weight | |||||||
